BOSCH 0001231011 Starter motors for Iveco Truk
|Flange Diameter (mm)||110.0|
|B+ Terminal (30)||M10|
IVECO EUROCARGO 100 E 15 -
IVECO EUROCARGO 100 E 15 K 1991 - 5861cc, 143HP
IVECO EUROCARGO 100 E 18 -
IVECO EUROCARGO 100 E 18 K 1991 - 5861cc, 177HP
IVECO EUROCARGO 100 E 21 -
IVECO EUROCARGO 120 E 14 1998 - 2003 5861cc, 143HP
IVECO EUROCARGO 120 E 15 1991 - 2003 5861cc, 143HP
Our company—Nitel Motors is an excellent manufacturer of gear-reduction starters and its components. We have passed ISO/TS 16949-2009 International Quality System strictly. Our satisfied products include Delco 38MT and 39 MT series, Bosch series, Mitsubishi series, Prestolite series, Hitachi series, more than 10 series and 100 models of starting motors. Our products suit for many kinds of engines and Trucks, such as Cummins engines, Deutz engines, Freightliner Trucks, International Trucks, Caterpiller engines, Volvo Trucks, Mack Trucks, Renault Trucks, DAF Trucks, Scania Trucks, Daewoo Trucks, Iveco Trucks, OMAN Trucks, Mercedes Trucks, Isuzu Trucks, Nissan Trucks, Weichai Power engines, Sinotruk, DCEC engines, CCEC engines, Shanghai Diesel engines, Dalian Diesel engines and so on.
we are very confident that when you work with us, We can seek common development profit.
We guarantee the quality.
1). When using the starter in winter, warm up the engine and use antifreeze oil.
2). The starter should be inspected and maintained every 3 months, and the copper sleeve, bearing or brush should be replaced if necessary. The maintenance period can be appropriately shortened or extended depending on the usage.
3). If any starter malfunction is found, please ask a professional car electrician for repair.
4). It is strictly forbidden to flush the starter with water during the engine test run or cleaning to prevent damage to the starter due to water ingress.
5). When starting or inspecting and repairing the starter, the car should be in neutral.
6). If the internal resistance of the battery increases with the decrease of temperature in the low temperature environment, the battery should be effectively heated at this time to achieve the purpose of reducing the internal resistance and facilitate starting.
7). Use low temperature batteries in plateau or low temperature environment.
8). The continuous working time of each starter shall not exceed 5s, and the interval between two adjacent starts shall not be less than 35s
9). The engine should be checked first and the starter can only be used when the engine is normal.
10). When the starter is in use, if the power output one-way gear and the engine gear ring have top teeth, first check whether the engine gear ring is worn and the one-way gear cannot mesh with the engine flywheel gear ring.