Prestolite-M93R3016SE for BOSCH MITSUBISHI PRESTOLITE DELCO DIXIE HITACHI ISKRA engines
The main difference between the deceleration starter and the conventional starter: The deceleration starter is equipped with a gear reduction device between the transmission mechanism and the armature shaft, and the torque is transmitted to the one-way clutch through the reduction device, which can reduce the speed of the motor and increase the output. Torque reduces the volume and mass of the starter.
Advantages of the deceleration starter: the volume and weight of the deceleration starter are about half of the traditional starter, saving raw materials, and at the same time it is very convenient to disassemble and repair. The number of magnetic pole pairs of the deceleration starter is the same as that of the traditional starter, but the field coil winding often adopts the method of connecting multiple small wires in series. Although the winding method of the armature winding is the same as the traditional principle, the manufacturing process is advanced.
A starter with a gear reducer installed between the armature shaft of the starter and the drive gear is called a reduction starter. The power of a series-excited DC motor is directly proportional to its torque and speed. It can be seen that when the motor speed is increased while reducing its torque, the power of the starter can be kept constant. Therefore, when a high-speed, low-torque series DC The electric motor as a starter can greatly reduce the volume and mass of the starter under the same power. However, the torque of the starter is too low to meet the requirements for starting the engine. For this reason, when a high-speed, low-torque DC motor is used in the starter, a gear reducer is installed between the armature shaft of the motor and the drive gear, which can reduce the motor speed while increasing its torque. can reduce the motor speed while increasing its torque.
Our company—Nitel Motors is an excellent manufacturer of gear-reduction starters and its components. We have passed ISO/TS 16949-2009 International Quality System strictly. Our satisfied products include Delco 38MT and 39 MT series, Bosch series, Mitsubishi series, Prestolite series, Hitachi series, more than 10 series and 100 models of starting motors. Our products suit for many kinds of engines and Trucks, such as Cummins engines, Deutz engines, Freightliner Trucks, International Trucks, Caterpiller engines, Volvo Trucks, Mack Trucks, Renault Trucks, DAF Trucks, Scania Trucks, Daewoo Trucks, Iveco Trucks, OMAN Trucks, Mercedes Trucks, Isuzu Trucks, Nissan Trucks, Weichai Power engines, Sinotruk, DCEC engines, CCEC engines, Shanghai Diesel engines, Dalian Diesel engines and so on.
we are very confident that when you work with us, We can seek common development profit.
We guarantee the quality.
TO FIT:YUCHAI G58003708100A002 6A
6G 6J 4E 4G