High performance starter motors for Prestolite-M93R3018SE trucks
The quality of the starter directly affects the service life of the car, so we must choose a high-quality car starter when buying a car. Okay, if it is a disassembled starter, connect the positive and negative poles of the battery on the car to the surface of the starter (that is, let it loop and connect the ground wire) and the live wire end of the starter Then use the live wire end to touch the wire of the ignition lock. If it can operate normally (there is no noise inside, no smoke, fire, etc.), it should be good. In addition, if there is no load , Can’t try out the gears of the starter, you need to install the car to know.
When the starter is found to be weak or unable to start, check immediately. Before inspection, clean the exterior of the starter. Check that the tension of the spring should meet the specified value. Lift the brush spring with a wire hook, remove the brush from the brush holder, and check the wear of the brush. If the wear is too large, update it. The brush must not be stuck in the brush holder. The contact area between the brush and the commutator should not be less than 75%. Check the ground wire of the brush and there should be no looseness. The brush should have good insulation (check with 2ZOV test lamp). If the above inspections are good and the fault still cannot be eliminated, the starter should be disassembled and the armature and magnetic poles should be further inspected.
Our company—Nitel Motors is an excellent manufacturer of gear-reduction starters and its components. We have passed ISO/TS 16949-2009 International Quality System strictly. Our satisfied products include Delco 38MT and 39 MT series, Bosch series, Mitsubishi series, Prestolite series, Hitachi series, more than 10 series and 100 models of starting motors. Our products suit for many kinds of engines and Trucks, such as Cummins engines, Deutz engines, Freightliner Trucks, International Trucks, Caterpiller engines, Volvo Trucks, Mack Trucks, Renault Trucks, DAF Trucks, Scania Trucks, Daewoo Trucks, Iveco Trucks, OMAN Trucks, Mercedes Trucks, Isuzu Trucks, Nissan Trucks, Weichai Power engines, Sinotruk, DCEC engines, CCEC engines, Shanghai Diesel engines, Dalian Diesel engines and so on.
we are very confident that when you work with us, We can seek common development profit.
We guarantee the quality.
|TO FIT：YUCHAI4G 4E 6A 6G 6J|